How To Enter DFU Mode On Your iPhone

• How To Enter DFU Mode On Your iPhone

• DFU Mode On iPhones How To Activate It

Every devices sometimes misbehave is a normal thing we should expect from devices, the question is what do you do when something strange appears or happen? Do you get to fix it or are you going to sit there and wait for someone to help you out? There are situations required for you to put your iPhone in DFU mode. However, since it's not an everyday occurrence, some users might not be familiar with the technique. 

This technique seems simple if you've encountered it, how can you enter DFU Mode on your iPhone 11 series and old iphones? Older iPhone models feature Touch ID while newer models make use of Face ID for authentication.
Henceforth, they require a slightly different method. The same goes for iPad models as the latest Pro models feature Face ID while older models are rocking Touch ID. Nonetheless, you'll find everything here to enter DFU mode on iPhone 11 and older models or any iPad model.

Those that don't know about it might be wondering what is use for. If you're looking to fully reset your iPhone and install new software or a troubleshooting method, that is where this feature comes in, below is step by step on how to enter DFU Mode on iPhones..

How To Enter DFU On iPhones With Face ID

• The first thing that you have to do is make sure that your iPhone is connected to the computer running iTunes.
• Turn Off your iPhone.
• Press and hold the Side button for three seconds. Hold till Apple logo shows on screen, Then press and hold the Volume Down button. At this point, hold both of these buttons for five seconds.
• On your computer, iTunes should show an alert to confirm that the device is in Recovery Mode and the screen on your iPhone will remain black. That's it, your iPhone is now in DFU mode.

How To Enter DFU Mode On iphones With Touch ID

• Most likely with the Face ID steps, simply connects your iPhone to a computer running iTunes.
• Turn off your iPhone.
• Press and hold the Power button on the right for three seconds.
• Press and hold the Volume Down button on the left while holding the Power button. Keep on holding both buttons for another five seconds. Keep in mind that, if you see the Apple logo on the screen, you have pressed for more than the required time and will be required to repeat the procedure
• Release the Power button while still holding the Volume Down button for about five seconds. If the screen stays black, your iPhone is now in DFU mode and iTunes should show you that it has detected your iPhone. Also note, If the "Plug Into iTunes" screen appears, it means you have over pressed  the maximum required time, so you try again.

And for folks that still rocks their older iPhone devices, this next step is for you, now let's go back to business...

How To Enter DFU Mode On iPhone 6s Or Older

• Connect Your Device to a computer via USB cable. Press and hold the Home button and Lock button. Release the Lock button after eight seconds while continuing to hold the Home button.
• iTunes will now detect your device in recovery mode. 

Never pressed more than required time listed in this post or else if you do, we advise you start afresh to avoid cracking. If an Apple logo appears, you have exceeded required we advice you start from the beginning.